DODGE H2S-611-USAF Mounted Units & Inserts

End Cap Groove:No; Max Bearing Speed:7500 rpm; Brand:Baldor-Dodge; Housing Coating:Powder Coat; Anti-Rotation Pin:Yes; Bearing Locking Device:Eccentric Collar; Ring Size:Standard; Retainer Material:Nylon; d:25.0000 mm; Bearing Series:205 Series;

D1:634 mm; H:73 mm; Fatigue load limit Pu:695 kN; Minimum axial load factor A:10; Basic dynamic load rating C:1630 kN; d1:746 mm; D:750 mm; Limiting speed:480 r/min; d:630 mm; Reference speed:240 r/min;

Dw:5 mm; r1,2 min.:0.3 mm; r2 max.:1 mm; Lw:19.8 mm; r1 max.:0.8 mm; Mass needle roller:3.05 g;

Grease:2 300 min-1; d:65 mm; H:18 mm; d1:90 mm; static Cor:117.000 kN; rs (min):1 mm; D:90 mm; D1:67 mm; dynamic Cr:44.620 kN; Oil:3 400 min-1;

Grease Type:Mobilgrease FM222; Retainer Type:Max Life Cage; Retainer Material:Polymer; Bearing Locking Device:Setscrew; Bearing Outer Ring Material:Steel; Expansion Type:Non-Expansion; Ring Size:Standard; Housing Coating:No Coating; Flinger Type:INTERNAL RUBBER LIP; Ship Weight:2.9 LB;

G2:G 1/4; B2:196 mm; d:420 mm; Hydraulic nut:HMV 88 E; d1:400 mm; Mass withdrawal sleeve:28 kg; G:Tr 440x5; Nut for removal:HM 3088; A:9 mm; G1:34 mm;

Preload class B GB:600 N; Static axial stiffness, preload class B:276 N/µm; Static axial stiffness, preload class D:496 N/µm; D2:100.64 mm; a:31.1 mm; d1:82.3 mm; Da max.:104 mm; Calculation factor e:0.68; Calculation factor (single, tandem) Y2:0.87; Fatigue load limit Pu:1.86 kN;

G2:M 6; Locking device:MS 3080-76; Mass adapter sleeve assembly:35.9 kg; d:400 mm; B1:168 mm; G:Tr 400x5; Lock nut:HME 3080; A:4 mm; Hydraulic nut:HMV 80E; d3:470 mm;

d:120 mm; B1:87.782 mm; d3 max.:144.602 mm; Hydraulic nut:HMVC 24E; Lock washer:W 024; G:119.786 mm; Mass adapter sleeve assembly:2.65 kg; Threads per inch:12; Sleeve:S 24x4.3/16; d1:106.362 mm;

d:80 mm; G:M 80x2; B1:59 mm; d1:70 mm; Lock nut:KMFE 16; Hydraulic nut:HMV 16 E; B:18 mm; Mass adapter sleeve assembly:1 kg; d3:105 mm;

G3:13 mm; Locking device:MS 31/670; d:670 mm; Lock nut:HME 31/670; B5:131 mm; Hydraulic nut:HMV 134E; d1:630 mm; G:Tr 670x6; Mass adapter sleeve assembly:329 kg; B:106 mm;

Grease Type:Unirex N2; Manufacturing Plant Location:Crossville, TN - DC; Bearing Family:Grip Tight Ball Bear; Expansion Type:Non-Expansion; d:1.9375 in; Retainer Material:Nylon; Bearing Inner Ring Material:Steel; Seal Type:Single Lip; Shaft Attachment (2):Grip Tight; Ball Material:Steel;

Mass bearing unit:1.3 kg; L:143 mm; A5:42.7 mm; Recommended tightening torque for grub screw:16.5 N·m; Limiting speed:2200 r/min; Thread grub screw G2:3/8-24 UNF; s1:32.6 mm; T:57.6 mm; B:51.6 mm; A1:21 mm;

Coefficient of friction µ max.:0.1; Specific static load factor K0:20 N/mm²; D:20 mm; B:12 mm; d:16 mm; Specific dynamic load factor K:10 N/mm²; Mass bushing:0.009 kg; Permissible sliding velocity v min.:0.25 m/s; Tolerance shaft:h8; Tolerance housing:H7;

d:45 mm; Dynamic (Cr):2.5 mm; Static (Cor):5.8 mm; D:85 mm; B:23 mm; Grease:113 kN; with cylindrical bore:5 300 min-1; Oil:13.780 kN; rs (min):1.1 mm; with tapered bore:6 700 min-1;